R620 G30
In a limited space, the R620 G30 makes full use of computing resources, storage resources, and network resources, and can flexibly configure resources according to business needs to achieve excellent cost performance and energy consumption ratio. It is widely used in Internet, finance, communication, transportation, etc. Various industries meet the needs of different business models.
New Platform Ultimate Performance
Supports 2nd Generation Intel® Xeon® Scalable Processors
Powerful computing performance, new 3 UPI interconnect architecture, bus bandwidth up to 10.4 GT/s
Support DDR4 2933MHz memory frequency, memory bandwidth increased by 20% compared with the previous generation
Flexible configuration to choose
Decoupling of hardware modules enables free configuration of computing, network, and storage to meet different business needs
Supports 16 3.5-inch or 28 2.5-inch hard drives, compatible with NVMe SSD, fully realizes storage
Personalized selection of resources
Onboard integrated gigabit network card, flexible expansion of OCP network card and PCI-E card, configure network resources on demand
Technical Specifications
Form
2U rack-mounted server chassis
Processor
Supports 2 second-generation intelligent Intel@ Xeon @ scalable processors
Chipset
IntelC620 series chipset
RAM
24 DDR 4 memory slots, up to 2933 MHz, support for multiple protection modes such as memory ECC, memory mirroring and memory hot backup; compatible with 12 DCPM M memories, up to 2666MHz
Storage controller
Supports pass-through’ RAID0, 1, 10, 5, 50, 6, 60 and other storage solutions; when configuring RAID controllers, supports Cache super capacitor protection, provides RAID level migration, disk roaming, self-diagnosis, Web remote settings and other functions
Local storage
Front: Supports up to 12 3.5-inch or 24 2.5-inch hard drives, and compatible with up to 8 NVMe hard drives Built-in: 2 SATA∕PCIe M.2*1 onboard EMMC chip
Rear: Supports up to 4 2.5-inch hard drives, and compatible with NVMe hard drives
Network
Network card: 1 OCP3.0, with NCS1 function OCP3.0 optional 2*1GE’ 2*10GE’ 2*25GE’ 2*100GE’ 2*200GE and other interfaces
PCI-E expansion
A maximum of 10 PCIe expansion slots can be configured, including 1 dedicated hard disk controller slot and 1 OCP slot
Other ports
1 RJ-45 management interface, located at the rear of the chassis 2 USB3.0 ports, located at the rear of the chassis, and the front of the chassis can be equipped with two USB3.0 or USB2.0 ports optionally. 1 VGA port, located at the rear of the chassis, optional to support front VGA 1 optional serial port, located at the rear of the chassis
Power supply
Optional 550W or 1200W CRPS high-efficiency platinum power supply, supports 1+1 redundancy, voltage range 100-240Vac (please refer to the power input value on the nameplate label of the host)
Management function
Integrated with BMC chip, provides 1 Gbps RJ45 management port externally, and supports Redfish, SNMP, IPMI2.0 and other standard interfaces; The remote management interface based on IKVM∕HTML5 provides comprehensive fault diagnosis, automated operation and maintenance, and remote management functions
Graphics card
Integrated display controller, resolution 1920×1080
Operating System
For the details of Microsof®WindowsServe, RedHatEnterpriseLinuX, SUSELinuxEnterpriseServe, Ubuntu, etc.,
Operating temperature
5℃~35℃ at work
Chassis specification
87.8mm (height) ×446mm (width) ×794mm (depth)
Full configuration weight
35kg